Skip to main content

Bultaco Alpina 250 1969









Comments

Popular posts from this blog

The Ducati RT 450 engine is complete!

So here is the thing..... Back in March I dropped off a very very run down used 450cc Ducati Single to Dave Ward out at Moto italia - Emu Plains. For which they all have a great laugh at my expense what a wreck of an engine it was. At the time I thought that it will look great once reconditioned inside and out. Back then I asked so.....when will it be ready and the answer was "Oh, you should have it by Christmas!". To which I thought bloody hell that is a long way off! Well let me tell you it was all well worth the wait and the motor looks like it came off a new bike! So here we are 12 months down with the bike stripped and the Engine Done tick , All fibreglass parts bought  tick , Front forks re chromed  tick , Wheels front and back re wired and rims new and ready to go  tick   Handlebar items purchased and ready to install  tick , Frame repaired and primed ready to paint next week  tick , Tank repaired (Thanks Bret Rosenthal) and together with the other f...

Ducati 750s Sport - Stunning

Ducati 750 Sport In 1973, the 750 Sport was the top model in the Ducati line-up, much as the 1199 Superleggera is today. Only 746 black-sidecase 750 Sports were produced in 1973, and 66 came to Australia. The 1973 Sport was the first Ducati to win a major production race in Australia when Tony Hatton took out the 1974 Adelaide Three-Hour race. When a magazine tested the 750 Sport in November, 1973 it managed a top speed of 211km/h. This was the fastest 750 the mag had tested and, unlike many contemporary machines, the 750 Sport didn’t scare the rider. Although it didn’t hav e desmodromic heads or 40mm carburettors, the 750 Sport was almost as fast as a 750 Super Sport. Back in the 1960s and early 1970s, café racers were for those who wanted to ride short, sharp trips to the next café. It began as a British phenomenon – café racers mimicking real road racers. Apart from some smaller-capacity factory bikes such as the Ducati 250 Mach I, café racers were generally home-...

RT 450 Tech Specs

ENGINE:  four-stroke single cylinder, 10° inclined, valve in head desmodromic distribution, with an 80° angle between each other, commanded by overhead camshaft and rocker arms, intake valve diameter 40 mm, drain valve 36 mm diameter. Bore and stroke 86 x 75 = 436 cc. Compression ratio 9.3: 1 Distribution diagram: intake open 70 ° before TDC and closes 82 ° after the BDC, the exhaust opens 80 ° before BDC and closes 65 ° after TDC. Clearance between valves and rockers for phasing: 0.10 ÷ 0.15 mm at suction and discharge; normal operating clearance when engine is cold 0.10 mm. IGNITION:  a distributor controlled by a gear chain on the right side, automatic advance 28 ° ± 2 °, 0.3 mm contact gap, spark plug 260. LUBRICATION:  Forced with a gear pump and oil in the crankcase saucer, capacity 2.5 kg, oil AGIP F.1 SAE 40/50 in summer, 20/30 in winter, integral change andfilter cleaning every 2000 km. POWER:  fall type, premium gasoline 98/100...